bas40-00 to bas40-06 document number 85701 rev. 1.6, 12-dec-05 vishay semiconductors www.vishay.com 1 18435 12 3 12 3 12 3 12 3 top view top view bas40-05 bas40-06 bas40-04 bas40-00 small signal schottky diodes, single & dual features ? these diodes feature very low turn-on voltage and fast switching ? these devices are protected by a pn junction guard ring against excessive volt- age, such as electrostatic discharges ? lead (pb)-free component ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec mechanical data case: sot-23, plastic case weight: approx. 8.8 mg packaging codes/options: gs18 / 10 k per 13" reel (8 mm tape), 10 k/box gs08 / 3 k per 7" reel (8 mm tape), 15 k/box parts table absolute maximum ratings t amb = 25 c, unless otherwise specified 1) device on fiberglass substr ate, see layout on next page. part ordering code type marking remarks bas40-00 BAS40-00-GS18 or bas40-00-gs08 43 tape and reel bas40-04 bas40-04-gs18 or bas40-04-gs08 44 tape and reel bas40-05 bas40-05-gs18 or bas40-05-gs08 45 tape and reel bas40-06 bas40-06-gs18 or bas40-06-gs08 46 tape and reel parameter test condition symbol value unit repetitive peak reverse voltage v rrm = v rwm = v r 40 v forward continuous current t amb = 25 c i f 200 1) ma surge forward current t p < 1 s, t amb = 25 c i fsm 600 1) ma power dissipation 1) t amb = 25 c p tot 200 1) mw e3
www.vishay.com 2 document number 85701 rev. 1.6, 12-dec-05 bas40-00 to bas40-06 vishay semiconductors thermal characteristics t amb = 25 c, unless otherwise specified 1) device on fiberglass substrate, see layout on next page. electrical characteristics t amb = 25 c, unless otherwise specified layout for r thja test thickness: fiberglass 1.5 mm (0.059 in.) copper leads 0.3 mm (0.012 in.) parameter test condition symbol value unit thermal resistance junction to ambient air r thja 430 1) k/w junction temperature t j 125 c storage temperature range t stg - 65 to + 125 c parameter test condition symbol min ty p. max unit reverse breakdown voltage i r = 10 a (pulsed) v (br) 40 v leakage current pulse test v r = 30 v, t p < 300 s i r 20 100 na forward voltage pulse test t p < 300 s, i f = 1.0 ma v f 380 mv pulse test t p < 300 s, i f = 40 ma v f 1000 mv diode capacitance v r = 0 v, f = 1 mhz c tot 4.0 5 pf reverse recovery time i f = 10 ma, i r = 10 ma, i rr = 1 ma, r l = 100 t rr 5ns 17451 15 (0.59) 12 (0.47) 0.8 (0.03) 5 (0.2) 7.5 (0.3) 3 (0.12) 1 (0.4) 1 (0.4) 2 (0.8) 2 (0.8) 1.5 (0.06) 5.1 (0.2)
bas40-00 to bas40-06 document number 85701 rev. 1.6, 12-dec-05 vishay semiconductors www.vishay.com 3 package dimensions in mm (inches) 2.0 (0.079) 0.9 (0.035) 0.95 (0.037) 0.95 (0.037) 0.52 (0.020) 17418 2.8 (.110) 3.1 (.122) 0.4 (.016) 0.95 (.037) 0.95 (.037) 0.1 (.004) max. 1.20(.047) 1.43 (.056) 0.4 (.016) 0.4 (.016) 0.098 (.005) 0.175 (.007) 0.95 (.037) 1.15 (.045) 2.35 (.092) 2.6 (.102) iso method e mounting pad layout
www.vishay.com 4 document number 85701 rev. 1.6, 12-dec-05 bas40-00 to bas40-06 vishay semiconductors ozone depleting substances policy statement it is the policy of vishay semiconductor gmbh to 1. meet all present and future national and international statutory requirements. 2. regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. it is particular concern to control or eliminate rele ases of those substances in to the atmosphere which are known as ozone depleting substances (odss). the montreal protocol (1987) and its london amendments (1990) intend to severely restrict the use of odss and forbid their use within the next ten years. various national and international initiatives are pressing for an earlier ban on these substances. vishay semiconductor gmbh has been able to use its po licy of continuous improvements to eliminate the use of odss listed in the following documents. 1. annex a, b and list of transitional substances of the montreal protocol and the london amendments respectively 2. class i and ii ozone depleting substances in the clean air act amendments of 1990 by the environmental protection agency (epa) in the usa 3. council decision 88/540/eec and 91/690/eec annex a, b and c (transitional substances) respectively. vishay semiconductor gmbh can certify that our semi conductors are not manufactured with ozone depleting substances and do not co ntain such substances. we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications. all operating parameters must be validated for each customer application by the customer. should the buy er use vishay semiconductors products for any unintended or unauthorized application, the buyer sh all indemnify vishay semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. vishay semiconductor gmbh, p.o.b. 3535, d-74025 heilbronn, germany
legal disclaimer notice vishay document number: 91000 www.vishay.com revision: 08-apr-05 1 notice specifications of the products displayed herein are subjec t to change without notice. vishay intertechnology, inc., or anyone on its behalf, assume s no responsibility or liability fo r any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale.
|
